Check and inspect suspension components: ball joints, tie rods, idler arms, springs, bushings, and check for accident damage.
BALL JOINT – Remove & Replace – 4WD Lower,One Side – [Includes: R&I Steering Knuckle.] – [DOES NOT include alignment.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
Anna S. gave our service a 5 star review on 1/23/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Thomas H. gave our service a 5 star review on 5/30/2023
Run initial inspection to identify no start failure. Inspect battery terminals and cables. Charge battery to full capacity. Load test battery and record readings. Inspect alternator belt and adjust as required. Perform alternator output test and record readings. Perform starter draw test and record Connect Scan tool run full powertrain scan for fault codes
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Jeremy H. gave our service a 5 star review on 8/3/2022